ProductsPlease review our product descriptions from the list below, then select Read More for detailed information.
|
|
PerpetuWallTM is a Cured-In-Place Fiberglass Reinforced Plastic Liner. It is a composite liner composed of Epoxy and Fiberglass Layers that produces a liner that is monolithic and a liner that is able to adhere 100% to the walls of the host structure regardless of the shape and size. The System is hand installed and requires no pre-measuring of the structure. Requiring practically no specialized or bulky equipment, the system is easy to install in just about any location. This simplicity allows for the liner to be installed in outfalls without roads being cut. |
|
Read more...
|
|
|
PerpetuSeal™ is a cured-n-place fiberglass liner that extends from the frame down to the bottom of the manhole chimney. It is monolithic and is hand installed in the same ways as our full depth liner PerpetuWall™. The seal does not depend on any mechanical locks and is completely bonded to the host structure. The seal is effective at stopping infiltration, exfiltration, and corrosion. The seal can be installed in any manhole, there are no limitations to shape or size. PerpetuSeal™ is a permanent solution versus mechanical seals and paint on seals at preventing infiltration, exfiltration, and corrosion. |
|
Read more...
|
|
PerpetuFastSetTM, also known as PLS-616, is a vastly different product for PLS-613 and PLS-614. It is a 100% solids modified epoxy, however, it is mixed a ration of 3:1 (adding Part B to Part A) and is designed, as the name implies, for faster setting. PerpetuFastSetTM was developed primarily for use in spot repairs in smaller diameter waste water pipes. |
|
Read more...
|
|
KevLinerTM product information coming soon. |
|
Read more...
|
|
|
PerpetuCoatTM is a 100% solids epoxy mastic with a tenacious bonding capability and the ability to cure in the presence of water. PerpetuCoatTM has a remarkable sag resistance that allows it to be applied in thicknesses in excess of 3/8's of an inch in one pass. PerpetuCoatTM is also chemical and abrasion resistant. All of these attributes produce one of the most advance epoxy mastics available. |
|
Read more...
|
|
PerpetuWeldTM product information coming soon. |
|
Read more...
|
|
|
Products